Day 82: Christmas Tree Nails

There is not much to tell about these Christmas tree nails. The steps are simple they just take some time.
To begin, chose 2 different colors of nail polish, 1 for the base color and 1 for the Christmas tree. You will also need a clear sparkle nail polish and if you chose, a "topper" for your tree. I found these little vials of nail decorations at Dollar Tree!

First, paint your nail the base color and let dry completely. I usually keep my nails short and I also have very short nail beds so I have a small space to work with. You may have an easier time with this project if you have longer finger nails.

The tutorial called for painters tape for this next step but all I had was masking tape. It worked just fine. Simply stick 2 pieces of tape on 1 nail forming an open triangle at the end of your nail.

 

Paint with polish you chose for the tree. After the polish is set you can remove the tape.  Let dry completely. Next, brush over the nail with the sparkle polish and using tweezers place a "topper" on your tree. I chose red stars. You may want to brush a thin coat of clear over the nail after you are finished to help hold the decoration in place and help even out the bumpiness of the nail.

 

They took a while and the stars were a challenge to put on but they I really liked them! For sure something fun to try!
Pin It

Extra Drawing Entries!

The drawing for the Christmas goodies box is just 1 day away! For your name to be entered an EXTRA time in the drawing just share this link!
If you have not "liked" our Facebook page please do so by Sunday Dec. 9th, for your name to be added to our drawing for a box of home created Christmas goodies! Pin It

Day 81: Mog Podge Christmas Sayings

The mog podge Christmas sayings was a project that we had fun making at my crafter meet-up. These were very simple and easy to make and it was a blast to see where everybody's creativity led them.
We started with some wood blocks that were approximately 2 1/2 X 4".  A big shout out and thanks to Hall's Furniture in Henderson TX for donating all of the wood for this project!

 

My sweet husband drilled 2 holes in the top of each block to make space for a hanger. Landon helped sand the sides of some of the blocks.

We painted our blocks with acrylic paint and let them dry. While they were drying we decided what our individual blocks would say. Everyone thought of something different to put on their blocks.
We dug through letters I had cut out of magazines and some even searched through more magazines to find just the right combination of letters and words. Everyone's looked different!

To attach the letters to the block we covered our block mod podge and put the letters in place. Then we covered the block with mod podge again this time fairly thickly.

 

Don't worry about the glue being white it dries clear. You can buy some mog podge that will dry leaving a pretty shine.

Here is a picture of some drying. Landon made the red one. He wanted it to say Merry Christmas.

 

After they were dry we cut a hanger out of 16 gage multi-purpose wire. This can be however long you want it to be. Then, we just laced it through both holes and using the pliers turned the ends up and twisted it around the front wire.
I had prepared my block ahead of time to use as an example and I put a bow of ribbon on mine. I accidentally forgot to take the ribbon to our meet-up! Sorry y'all! Hopefully they all had some ribbon at home to finish them up.
This is mine. It says "His name shall be called Emmanuel" taken from Matthew 1:23.

 

Other idea's were a count down till Christmas, kids names to hang on their doors, and other Christmas sayings such as "Joy to the world", and "Don't get your tinsel in a tangle".

Just have fun with it and be creative!

Pin It

Day 79: Chocolate Dipped Peppermint Sticks

This year for Christmas Landon is giving Christmas snacks to those on his gift list. We searched around for some cute Christmas snacks and found some really interesting ideas! Chocolate dipped peppermint sticks was one of those ideas.
The picture that was inspiration for this project showed regular peppermint sticks but we thought it might be more fun to use candy canes. Not to mention I couldn’t find any long peppermint sticks! There were 12 candy canes in the package but we ended up with 11 to give because I accidentally broke one when I opened it. Landon was excited that I did because that meant he could eat it! He said they were very good by the way.

We started by melting some white almond bark. I knew that this project wouldn’t take a lot of almond bark but I wanted the melty goodness to be deep enough for me to dip the candy cane for a good coating. So, we used a small glass measuring cup to do the melting. Because the cup wasn’t very big we were able to use a small amount (about 2 ½ squares) of almond bark and kept it deep enough to dip.

 

We thought about dipping the straight part of the candy cane but chose instead to dip the crook of the cane. That way the pretty part is at the top.

After dipping the cane we laid it on wax paper and sprinkled it with red, green, and white Christmas sprinkles. Landon tried different kinds but the little ball sprinkles stuck the best and looked cutest.

When we finished all the candy canes we let them dry for 20-30 minutes. After they were completely set we put them in sandwich bags and tied ribbon around them. I would have preferred cute Christmas ribbon but instead we used some less feminine looking ribbon.

 

Pin It

Day 80: Santa Hat Pretzels

Once again we are working on Christmas snacks. Today's snack was Santa hat pretzels. I only had a picture to follow for these and they did not turn out very good.
We started by melting the left over almond bark from yesterday's project. We did have to add a little more almond bark to the measuring cup today.

We dipped one side of a pretzel into the almond bark and placed it on a piece of foil (we used all the wax paper yesterday).

 

We sprinkled the almond bark with red sprinkles.

 

Next, we tried to stick a mini marshmallow on top of the pretzel but it was to tall and looked funny. We ended up pulling the mini marshmallows in half and just using half a mini marshmallow on each pretzel.

 

This is what they ended up looking like. Not really like Santa hats unless you use some imagination. Maybe some of you who are more artsy can make them work. BUT, they do taste really good!

 

Pin It

Day 78: Snowman Kit

We almost never get snow. When we are blessed we might see it once a year. Anytime we have snow the world stops and we all spend the day making snow angels, sledding, making snowmen, and drinking hot chocolate.
I thought it would be fun to have a snowman kit all ready to go for when and if it ever snows.

To make a snowman kit you need:
Fimo or Sculpy clay
Small dowel rods
Oven

I pulled out some Fimo clay I have had for years hoping that it was still soft and workable. Thankfully it was, so that saved me some money and used up some old supplies. We used some dowel rods that we had and wire cutters to cut them down to size.

We just cut our rods in half which made them about 4-6 in. each.

Next, we kneaded our clay to make it soft and pliable.  For our carrot nose we mixed yellow and red because we didn't have orange clay. This made a good lesson in colors!  Landon formed the clay into a carrot shape. Then, we stuck a stick in the thick end of the carrot. He wanted to make lines in the clay to make it look more like a carrot. He used a butter knife to do this.

We made 6 pieces of "coal" for the mouth out of black clay. All we did was stick a ball of clay on the end of a stick and formed it into uneven shapes. However we thought coal would look.
We decided to make the eyes look like buttons. To do this we took green clay and blue clay and made 2 - 2 1/2 in. discs.

 

We rolled out a thin piece of clay and outlined the top of the disc.

Using 1 of the dowel rods we made 4 holes in the disc.

Using 2 more pieces of thinly rolled clay we stuck them in the holes, criss crossing them to make it look like a sewn button.

To place these on a dowel rod we used a little ball of clay and placed it around the top of the stick. Then, we stuck the button on top of that.

Placing all the pieces on a cookie sheet, we baked them in a 230 degree oven for 30 minutes.

 

After they cool they are ready to be used or stashed away for a snowy day! You can even add a hat and scarf to your kit if you are so inclined.

 

 

We can't wait to use our snowman kit!

Pin It

Day 77: Gingerbread Play Dough

Landon and I have had a blast discovering homemade play dough! He loved the snow play dough we made a week or so ago and this project was just as fun!
We began the gingerbread play dough by combining a cup flour, and 1/2 cup salt, with 2 teaspoons cream of tartar, and 2 tablespoons pumpkin spice. The recipe called for cinnamon, ginger, nutmeg, and cloves but we decided to use the pumpkin pie spice instead.

After combining all of the dry ingredients we added 1 cup water, and 2 tablespoons vegetable oil, stirred it together very well, and turned the stove on medium heat.

It did take a little while for the dough to start cooking. Once it was nice and doughy we turned it on to wax paper to cool.

Easy and fun. Landon had a great time making gingerbread men out of his play dough and it made the house smell awesome! Pin It